Salix is the market leading exclusive distributor of Gantrex crane rail systems

Crane Rail:

Salix through our close partnership with Gantrex can supply European and North American crane rail to the Australian & New Zealand Market. We can provide crane rial profiles to meet various standards such as AS, DIN and JIS to name a few. Utilising Gantrex’ regional warehouse in Malaysia we are able to supply with competitive lead times. Please contact us today to fulfill your crane rail requirements.

DIN profiles – A55, A65, A75, A100, A120

Other Profiles – MRS86, CR73

 

Crane Rail Fixing Clips:

GANTREX® RailLok™ clips are the newest and most innovative rail clips on the market. The RailLok™ clips were introduced in the early 2010’s following a thorough design process including finite element analysis to ensure optimal life and load capacity. Clips are available in both bolt able and weldable designs to suit your soft mount system. Salix is happy to assist with the sizing and selection of your soft mount crane rail system, get in touch today.

RailLok™ Boltable clips

Code:

Maximum side Load:

Lateral Adjustment:

B10

50kN

10mm

B15

100kN

15mm

B17

100kN

10mm

B20

140kN

15mm

 

RailLok™ Weldable clips

Code:

Maximum side Load:

Lateral Adjustment:

W10

65kN

10mm

W15

120kN

12mm

W17

165kN

20mm

W20

165kN

14mm

 

Crane Rail Pads:

RailLok™ MK9.0 continuous pads are sold in 12m lengths and are designed to complement RailLok™ clips. MK9.0 pads are available for a wide range of crane rail profiles. It is recommended that rail pads are implemented in all crane rail systems to reduce noise and vibration and evenly distribute the load leading to increased life of the rail clips.

RailLok™ MK2.0 discontinuous pads are cut to size and are designed to complement RailLok™ clips. It is recommended that rail pads are implemented in all crane rail systems to reduce noise and vibration and evenly distribute the load leading to increased life of the rail clips.

The team at Salix is happy to assist with sizing and selection of a soft mount rail system to suit your application, please get in touch today.

(Include links to MK9.0 and MK2.0 pad catalogues)

 

Soleplates:

Salix can provide fabricated soleplates and chair plates for both continuous and discontinuous steel support. These can be supplied with all holes drilled for anchor bolts and lower clips welded in place for quick and simple installation.

We are also able to offer Gantrex’ adjustable chair plate system for use in instances where ground settlement needs to be considered. With this adjustable system chair plates and be shimmed to ensure the rail remains level and maintaining smooth operation of the crane.

(Include catalog for adjustable chair plates)

 

Trenchlok – Cable Protection System:

GANTREX TrenchLok™ cable protection system efficiently and economically protects cranes’ power cables from damages and problems caused by crossing vehicles traffic in ports and steel mills. The cables are also sheltered against debris entering the trench and adverse weather conditions. In addition, it eliminates tripping hazards for pedestrians.

 

Tieback Assemblies:

The connection between runway girder ends and building columns is a common area of failure on overhead crane runways. Often called tieback connection or surge connector, this joining proves subject to the fatigue stemming from flexural stresses in runway girders from crane operations. 

GANTREX Crane Girder Tieback Assembly is the proven solution to accommodate flexural movements without fatigue, whilst providing the necessary load transfer to the building column. Gantrex tieback assemblies are designed to fit on your crane loading and building configuration and can be used for new construction or runway refurbishment.